© Copyright Daily Used Tools. All rights reserved
Getting The Job Done Right
By: Darion Robinson
A bathroom is a small space but it can cause big headaches. Most homeowners will know what we are talking about. After all, we spend more than 1.5 years of life in a bathroom.
This is why it is important to pay special attention to the bathroom which is often one of the most neglected corners of a house. Hence, they are often home to problems like leaky faucets and clogged drains.
It is very important to deal with these issues as soon as possible as not doing so can lead to long-term damage and destroy the foundation of your house. Plus, a faulty bathroom can also cause the value of your property to go down drastically since a large number of people look at the bathroom when they inspect a house for purchase.
We’ve listed some common bathroom problems along with how you can fix them yourself – quickly and inexpensively.
Let’s have a look!
Imagine standing under the showerhead waiting for the water to come down at a regular speed. It can be both frustrating and time-wasting. In some cases, it may be due to a faulty pipeline or a lack of water pressure, but if the line is fine and there is proper pressure in the other taps in your bathroom, then it is time to have a look at the showerhead.
This mainly happens due to the mineral deposits which overtime form or accumulate inside your showerhead; they block water from coming out from the outer end of the showerhead and effectively obstruct flow holes.
But not to worry, the solution is pretty easy and involves cheap nontoxic chemicals or liquids you can find lying around your home. Head to the kitchen, find a small plastic bag that fits the showerhead and a bottle of vinegar, and you’ll be on your way to solving the problem.
Here are the steps:
If it doesn’t solve this common bathroom problem then you may have to replace the showerhead or look into other possible causes.
A clogged drain whether it is in the shower, tub or sink can be annoying for many reasons. It messes up the look of the bathroom, leaves a bad impression on people, looks and feels dirty, and also prevents you from performing regular bathroom duties.
This common bathroom problem may appear massive, but the solution is very simple. The most common reason for clogged drains is body hair and debris. So, before you pick up your phone and call in an expensive plumber, try to fix the problem yourself. All it takes is a simple Zip It tool that you can easily purchase from any hardware store.
It looks like a giant zip tie and is pretty easy to use. Slide or work it into the clogged drain and push it as far down as it will go. Once you feel that you can’t go any further just pull it up slowly. It will come back with hair that had been clogging your drain.
All you need to do is wipe the gunk off the tool, rinse it, and repeat the process again until you’ve pulled out most of it. Lastly, run hot water down the drain and it should be fine.
If it doesn’t work, then you may consider using the same mixture you created in the first step (vinegar and baking soda) to open clogged drains. Pour it into the drain and let it do its job.
With time, most water supply valves will start to leak, it’s natural and you can’t do anything to stop it. We suggest that you catch these leaks in time so you can correct the problem. If you’re too late, then you may have no option but to replace your valve.
Leaky valves can be easily detected, you will constantly hear a drip .. drip .. drip sound coming from under the bathroom sink.
This is both annoying and irritating. Plus, it also results in wastage. Hence, it is important to solve this bathroom problem.
Get a wrench out of your tool kit and tighten the packing nut around the opening of the joint or the valve, This will only take you a minute.
However, if the leak persists, then open up the valve at the joint and look in. You may find a green mold formed in the opening which may be the cause of the leak as it causes the edges to dilute.
If that’s the case, you’ll need to replace the adjoining pipes, if not simply use a soft brush soak it in warm water and clean the open ends of the valve.
Once done, tighten it back in and it should solve the problem. However, if the problem still persists then you may have to replace the valve.
This surprisingly common bathroom problem can leave anyone red in the face.
Over time, the end which is attached to the actual seat loosens, which cause the seat to get wobbly. The solution is quite simple and you will not even have to replace the seat.
Look towards the end where the nuts are screwed in. You’ll most probably find that the washers are either used up or have come out. Use a screwdriver to tighten them or replace the washers by unscrewing the seat and fixing it back in.
This whole process will take around 15 minutes and your problem will be saved in no time.
However, if you find cracks around the bolt area, then it may be a good idea to consider replacing the toilet seat.
If there is a leaky faucet in your bathroom then fix it as soon as possible.
The fix is simple and quick. Shut off the water from under the tap and move to solve this common bathroom issue.
Most openings are screwed in, you can unscrew them out and either replace the washer or give it a good clean – most times this will resolve the bathroom issue.
However, if you find that your faucet is still leaking, then you’ll need to unscrew it from the base.
Most times, you’ll just need to have a part replaced to fix the problem. If you have some experience in DIY home maintenance you should know which one.
Otherwise, just drive over to your local hardware store for advice. They’ll tell you which part needs replacing or if you need a brand new faucet.
A running toilet puts a strain on your water bill. The issue is quite easy to identify. You’ll hear the water running constantly.
This problem can only be resolved by looking into the water tank above your toilet. Most toilets are single sets these days; meaning the toilet bowl and tank aren’t separate.
It only takes a minute to inspect the tank, all you need to do is lift the top and have a look inside. This bathroom issue usually occurs due to the flapper chain. It is not uncommon for it to get stuck which causes a running toilet.
All that you have to do is wobble it a bit and it will slide back in place, this should resolve the issue in most cases.
But, if you find that your float is damaged or the water is too high for the float, then the issue is not with the chain. You’ll need to check the float and have it replaced.
This is one of the most common bathroom problems. A scaly faucet occurs due to the build up of lime around the base of the faucet or at the opening.
Believe it or not, the simple solution to this common issue is white vinegar. Apply some over the area and wipe it off with a piece of cloth. Rinse the faucet in water and then leave it to dry. The whole process will take you just a few minutes.
If that doesn’t work, soak paper towels in vinegar and wrap them around the faucet. Leave it there overnight and remove it in the morning. Wash your faucet with regular soap and scrub out any stubborn spots by using a bit of baking soda with a toothbrush.
Rinse and dry the area, keep a microfiber cloth near your sink to regularly dry it off between uses.
With time, you’ll find the grout between the bath tiles changing color. This problem is common around the shower area. This can affect the look and feel of the bath and should be taken care of.
The solution, fortunately, is quite simple:
A poor ventilation system can make it uncomfortable to stand in the bathroom. A major sign of a poor ventilation system is stained walls.
If you find that humidity lingers on long after you’ve taken a shower, it’s time to take a look at your vents. It’s simple enough, screw it out or hold it by the edges and take the top off.
The problem usually occurs due to a damaged fan. If such is the case, you will have to replace it. We suggest that you hire a professional for the job.
It’s not uncommon for a bathroom to smell. Instead of spending money on bathroom fresheners, solve the root cause of the problem.
If you ventilate your bathroom properly and fix the cause of the smell, you will have nothing to complain about. Standing water, poor ventilation, and leaky faucets are some of the most common causes.
We suggest that you quickly move to solving these common bathroom issues as not doing so results in:
Now that you know all about the common bathroom problems and how to solve them, we hope you will have no difficulty in solving these common bathroom problems.
We suggest that you wear gloves when solving bathroom problems so that you do not end up dirtying your hands. Other than this, consider calling a professional if you believe a problem is too complicated for you to solve.
By Darion Robinson
© Copyright Daily Used Tools. All rights reserved