© Copyright Daily Used Tools. All rights reserved
Getting The Job Done Right
By: Darion Robinson
Table saws are among the most important tools that a woodworker can never lack in his/her woodwork shop. They are capable of giving precise cuts and they tend to give you more control on your piece compared to a circular saw. In fact, nothing quite cuts large panels and plywood or MDF sheets like table saws. As such, picking the best table saw that is feature-packed and safe is crucial. Sadly, this too is not easy since you are usually faced with a large array of table saws all bearing promises about performance and it can get difficult to pick one. That’s why we lined up 8 of the best table saws that you can choose today based on your needs.
There are plenty of reasons why the Dewalt DWE7480 is loved by several woodworkers. While its solid construction is something to point out, the DWE7480 ideally stands out because of the combination of power, portability, and reliability all packed into a portable table saw.
Professionals equally marvel at the Dewalt DWE7480’s 15-amp motor with a 20-inch rip capacity. If that wasn’t enough, perhaps its load speed of 34,800 RPM can intrigue you. This table saw can achieve a maximum cutting depth of up to 3-1/8 inches at a 90″ angle and up to 2-1/4 inches when you are working at 45″, and this can totally change the way you do your work. For instance, you will be able to make your cuts more quickly and accurately. Other than that, it is worth talking about the table saw’s metal roll cage base that provides the extra strength you need to work with. Whereas many might believe that it adds up to the weight of the Dewalt DWE7480, you’d be happy to know that this saw is compact, light, and very easy to move around your workshop.
The Dewalt DWE7480 takes in 15 amps of current to deliver a no-load speed of 4,800 RPM which is phenomenal for a table saw in this category. This can go up to 34,800 RPM in cases where you need that extra power to deliver a quick cut. This further complements the table saw’s 24-1/2 inch rip capacity.
Weighing in at just about 53 pounds, the Dewalt DWE7480 is one of the lightest table saws you are likely to come across when in search of a reliable one. While durability has been put into consideration in the design of the Dewalt DWE7480, it is evident that the table saw has also been built with sturdy materials that keep its weight low.
Precision is taken to the next level when you have the Dewalt DWE7480 in your workshop, thanks to its automatic locking fencing. This not only allows you to make straight and accurate cuts on your wood, but since it is adjustable, it enables you have great control over the way you’d like your woodcuts to come out.
If there was one word that could be used to describe the SawStop PCS175, nothing would suit better than “innovative”. Whether you are looking for performance, reliability, or safety, this table saw has acquired lots of reviews to keep you hooked. Its patented safety system, for instance can detect if you accidentally touched the spinning saw blade.
After detection, it would take about 3-5 milliseconds before the saw is brought to a complete stop. Sure, there’s going to be some damage in your saw internally, but you would’ve also escaped from a fatal injury as well. If it’s either $100 for repair or your finger, the wiser choice would definitely be your finger, and the SawStop PCS175 guarantees you that. This table saw is not all about safety alone too. Its design, finish, and dust collection system all result into a tool that you would definitely want in your workshop.
A safety system that detects accidental contacts and stops the saw is neat, especially when it achieves this in literally fractions of a second. However, the SawStop PCS175 also packs useful other features that make it safer such as the driving knife which minimizes kickbacks in addition to offering you protection when making non-through cuts. You also get a micro blade guard which protects flying debris from reaching you.
You can make transitions between blades in record time on the SawStop PCS175. This applies to the riving knifes too. It also comes with interchangeable blades (the standard 10-inch and the 8-inch dado blades). Fast transitions between blades means that you save more time and can thus finish your work quicker. When you include the SawStop PCS175’s quick-release zero-clearance inserts feature too, then you’d find this to be a rather ideal table saw in case time is of essence in your workshop.
The SawStop PCS175 incorporates great features that enable you to adjust both the blade and the table with precision. Its 36-inch T-Glide fence system also adds to this precision as well.
Any contractor would not mind the DEWALT DWE749RS and for plenty of reasons. Apart from its great design and it’s easy functionality, its ease of transportation from one place to another makes it super portable and ideal for contractors.
In addition, DeWalt also made sure that you get to focus more on your work by incorporating 2-inch dust collection ports. With these, you can easily hook up a vacuum and get rid of the dust that will be coming out of your machine during operation. Power, performance, and convenience are some of the things that the DEWALT DWE749RS table saw guarantees.
The DEWALT DWE749RS is powered by a 15-amp motor that is slightly more powerful than its predecessors. It can deliver up to 4,800 RPM, and this has had an improvement on the ripping quality. It might not be the highest RPM out there, but it does enable you cut through the basic materials like plywood with a lot of ease.
The rack and pinion fence rails on the DEWALT DWE749RS are actually the reason why this table saw excels when it comes to performance. The accuracy on the DEWALT DWE749RS stems from the fence which is also super easy to adjust and always stays parallel to the blade. Since the fence design is on both the back and front sections of the saw, this greatly reduces the chances of a fence drift.
DEWALT DWE749RS includes a mobile stand that is very easy to set up and strong at the same time. It comes in handy when making narrow rip cuts. However, you would find yourself using it for various other situations too.
You get a 2-1/2″ dust collection port that you can easily connect a vacuum to and ensure that your workspace remains dust free.
DEWALT DWE749RS’s on board storage system tends to provide easier access to the saw’s blade guard assembly, driving knife, and even fence.
Makita’s 2705 10-inch table saw is another great pick for contractors who would love to get their hands on a table saw that is powerful and versatile at the same time. One thing you will most definitely notice about the Makita 2705 is that it incorporates a wide range of features that makes it convenient and easy to use.
For instance, the dual slide guards on this table saw usually allow for easier measurements from the blade all the way to the rip fence. Its precision adjustment, on the other hand, involves a T-slot miter gauge which has grooves. They provide support for the cutting material. Its 15-amp motor delivers 4,800 RPM while allowing you maximum cuts of 3-9/16″ at 90 degrees and 2.5 inches at 45 degrees.
You can easily store and move the Makita 2705, and this can be especially useful if you will require the table saw to be moved from one job site to another often. While some table saws are more portable than this, they might lack some of the features that the Makita 2705 has. In case you need to take portability a notch higher, you could always consider the 2705X1 model of this table saw.
There isn’t anything inherently new with the Makita 2705’s motor. A 15-amp motor delivering 4,800 RPM is somewhat a norm among these table saws. However, it would be worth mentioning that for table saws, getting a clean cut is usually far important. This is why table saws like the Makita 2705 chose to stick to a motor with an average RPM while getting the job done perfectly.
The Makita 2705 features anti-kickback pawls that provide some extra layer of protection. The two anti-kickback pawls can also be moved to different positions when the saw is not in use. The blade guard on the Makita 2705 is also worth mentioning. The transparent and modular blade guard on this table saw gives you a clear line of sight on the point where the blade touches the wood. This improves your accuracy and precision levels.
The Powermatic PM1000 table saw has the look and feel of an average saw but packs a lot of hidden features that may easily go unnoticed. For one, it is wired for use of the 115V mains supply while running on a 1-3/4HP motor. Not the most powerful, but it does get the job done.
Its blade surround and collection hose, on the other hand, tends to provide an unobstructed path which ends up maximizing dust collection and helping your workshop remain just a little bit cleaner. As it is features a tool-less guard assembly that has independent side leaves, the Powermatic PM1000 remains as one of the safest table saws out there in its category.
The Powermatic PM1000’s exclusive accufence merely provides precision when handling the table saw. You can think of it as the fence that assists you in aligning materials accurately on the table. Most other table saws have this feature as well, but in combination with other core features of the Powermatic PM1000, the accufence tends to stand out.
You’d want to be super comfortable before working with a table saw for long durations. The Powermatic PM1000’s 7-inch handwheels make adjustments of the blade height and bevel super easy.
If you enjoy finishing up blade changes within no time and with the least number of tools, then Powermatic PM1000’s arbor lock feature would suit you. It allows you to change blades using a single hand. However, it is not completely tool free as there are some components that would require you to still reach out for your tools.
On the Powermatic PM1000, you will find out that its sturdy miter gauge tends to pivot on 60 degrees on both sides of the machine. This enables you to easily adjust for a wide range of cuts.
The Powermatic PM1000’s has been enclosed with a cast iron base to offer rigidity.
You will love the Bosch Power Tools 4100-10 if you love simplicity around your workshop. The table saw is fairly easy to set up and pull apart. This makes it super ideal for DIYers or even contractors who may need to use the table saw in a different workshop from time to time.
Apart from providing great control over the material that you are cutting, it features the square lock rip fence glides which gives you consistent cutting performance. Other than that, Bosch Power Tools 4100-10 also features an on-tool storage for all your tools and saw attachments that you may need on the job.
This table saw is one of the most powerful of its kind. With a maximum speed of 3,650 RPM and a maximum of 4HP, this saw fitted with a 15-amp motor can handle almost anything you task it with. With this kind of power, you’ll be finishing your work in record time.
We mentioned it at the beginning, and we’ll say it again. The Bosch Power Tools 4100-10 pushes portability and ease of use to the limits. Weighing in at just 58 pounds, this is one of the lightest table saws you are going to come across. If you included all its equipment as well as its stand, you would only push its weight to about 90 pounds which is still very lightweight.
If you hardly move from workshop to workshop, you might not find the onboard storage particularly helpful. This is because you could keep your tools just about anywhere in your workshop. However, if you’ll be mobile, the onboard storage can save you lots of time and give you peace of mind as you will have all your tools in one place.
Bosh was super generous with the aluminum top it fitted on the Bosch Power Tools 4100-10. It is large enough to work with comfortably. In addition, its 25-inch rip capacity makes it ideal for a wide array of rip-cutting operations.
The Bosch Power Tools 4100-10’s advanced design allows for precise clamping. It also has anti-kickback paws that protect you from kickbacks.
Are you a DIY woodworker who needs to step up and start tackling bigger woodworking projects but need a reliable table saw? You will find that the SKIL 3410-02 is more than just a perfect match for you. It comes with a 15-amp motor that is ideal for ripping through various kinds of wood.
In addition, its 20 by 26-inch cast aluminum table supports your work effortlessly so that you can focus more on your work and less on tuning your tools and equipment. Speaking of tools, it is also worth mentioning that it is quick and easy to set up this table saw thanks to its quick mount system.
As a woodworker, you know how important it is to be precise with your measurements and alignments. The SKIL 3410-02’s self-aligning fence makes matters regarding precision easy and painless. It features a metal T-miter fence which can easily move on the side fence rails. In addition to that, the locking mechanism allows you to lock in to position quickly before readjusting it once again.
The durable steel folding stand on the SKIL 3410-02 is also a feature worth mentioning about. The stand is easy to setup and can also be conveniently stored in case you don’t have any immediate use for the stand. The steel stand provides stability for the table saw.
Together with the self-aligning rip fence, an EZ view measurement system ensures you use accurate measurements and settings. You don’t get accurate measurements alone, but it enables you to get accurate cuts quicker without too much hassle.
As the SKIL 3410-02 offers you 3-1/2 inch cut heights, you are able to cut through four times into the material in one pass. This is necessary in case you intend to be dealing with a wide variety of materials in your woodworking projects. In addition to the decent cut height capacity, the SKIL 3410-02 delivers them swiftly and accurately.
A heavy-duty cabinet, a 4-foot dust collection port, and a quick release riving knife are some of the few things you could pick up on a Grizzly G0690 Cabinet Table Saw. However, there’s more. It includes both standard and dado table inserts and this gives you a lot of convenience depending on which one you favor.
Its 3HP motor, on the other hand, delivers 4300 RPM which is enough to give a maximum dept of cut of 3-1/8 inches. It has a maximum rip capacity of 29-1/2 inches and comes with a dust port that is four inches wide.
With the Grizzly G0690’s magnetic switch, any accidental startup will be stopped automatically in case of a power loss.
The 4″ dust collection port on the Grizzly G0690 is a lifesaver especially if you intend to use this saw for a considerable amount of time. You could always connect it to a dust collection system and have the sawdust safely collected to one location where you can then dispose it.
The Grizzly G0690 is made of cast iron which is durable. This ends up making the table saw stable and ideal for long-term service.
While there are table saws that have tool-less blade changes, you may not be getting that feature with the Grizzly G0690. You would need a wrench along with some few other tools to change the blade. However, you’d be happy to know that this table saw does have a blade guard with some decent blade height too.
A 3HP motor is quite powerful especially when fitted on a table saw like the Grizzly G0690. Of course, the performance of the Grizzly G0690 is not entirely hinged on its motor but having a decent motor like the one on this table saw is a sure bonus.
As they are tools that are going to sit in your workshop for a long time, you definitely want to pick something that will serve you throughout and without fail. The key thing in selecting table saws is to focus on the type of table saw it is, the amount of power it has, its dust collection system, its blade compatibility, and finally its safety factors. Since you as the operator would be forced to hold the material that is being cut instead of the saw, it would be good to consider saws that consider your safety.
If you’ve been keen with the table saws we review in this article, you must have noticed that these saws differ a lot when it comes to size. Whereas those like the Grizzly G0690 looked larger in size, there are those like the Bosch Power Tools 4100-10 that were smaller and lighter. That leads us to the three different types of table saws that you can get. They include:
Most people who are just “starting out” are more likely to go for bench table top saws than any other type of table saw. This is because they are the most portable of all the three as they are the smallest and lightest. Popularly known as portable saws or job site saws among the beginner DIY enthusiasts, they always pack enough power to do the basics as they are not as powerful for every kind of task you throw at them. Other than that, it is worth mentioning that their tables are usually short and that they do not support large stock. Thus, you should really consider if you are still comfortable with a bench table top saw especially if you plan on advancing your woodworking skills.
They are equally popular among DIYers, but the main difference between DIYers that go for contractor table saws and bench table top saws usually lies in the power that the saw can deliver. Contractor table saws are mostly great for tasks that bench table top saws couldn’t quite be capable of handling. Their 1-2HP motors are just about powerful for handling a wide variety of tasks. In addition to this, they have spacious tables, and this makes them slightly heavier than bench table top saws. Most contractor table top saws weigh between 200-300 pounds.
These saws can practically do everything you throw at them since they are more powerful (their motors can deliver 3-5HP) and are super accurate at the same time. They are also the bulkiest of the three, but since they also give you plenty of choices for large table extensions to choose from, they end up being a worthy investment in the long run.
After settling on the type of table saw that you need, you should also be keen on the amount of power you might need in future. The availability of a dust collection port is equally important as it would help you keep your workspace tidier by collecting dust to one central location. Other than that, you need to be on the lookout for innovative safety features like those offered by most DeWalt table saws – the auto blade break.
By Darion Robinson
© Copyright Daily Used Tools. All rights reserved